Do góry

do1q nie dziala

Temat zamknięty
SpiritedAway
43
01.08.2008, 09:10

Ludzie pomozcie!
Nie dziala mi komenda aktywujaca do1q encapsulation. po prostu nie jest dostepna! Zakladam, ze to wersja IOS, poniewaz jestem pewien, ze na 2620 to powinno dzialac. Ponizej moj show ver:

Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.0(7)XK2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC:Home:SW:IOS:Specials for info
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Tue 31-Oct-00 18:09 by kpma
Image text-base: 0x80008088, data-base: 0x8080DBA0

ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-I-M), Version 12.0(7)XK2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Router uptime is 11 minutes
System returned to ROM by reload
System image file is "flash:c2600-i-mz.120-7.XK2"

cisco 2620 (MPC860) processor (revision 0x200) with 28672K/4096K bytes of memory.
Processor board ID JAD05030O2J (601833912)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

TuneUp
70 455
TuneUp 70 455
#130.09.2008, 13:30

Zmien IOS.

Zibi
Moderator
2 986 7
Zibi 2 986 7
#230.09.2008, 13:35

wydaje mi sie, ze tam jest tylko dot1q

Zibi
Moderator
2 986 7
Zibi 2 986 7
#330.09.2008, 13:46

a jednak pomylka, sorrki, numery podwozia mi sie pomylily http://www.cisco.com/warp/public/cc...

TuneUp
70 455
TuneUp 70 455
#430.09.2008, 14:29

zakladam ze to literowka i chodzilo o dot1q :-) ale czasu minelo duzo, kolega sobie pewnie juz poradzil.

  • Strona
  • 1

Katalog firm